4. THE ESSENTIALS OF SYSTEM
The components of the device are given below.
Arduino ready microcontroller, input-output pins, oscillator and so on. a simple computer that you can use to detect and control the physical world that houses electronic components. It is a simple physical computing platform with a simple microprocessor and a development environment for software. This development platform includes various Arduino cards, add-ons for many different operations, and the Arduino IDE for writing programs.
Arduino UNO is one of the most widely used Arduino cards in the field, which uses the ATmega328 microcontroller for people’s use in 2010. This platform operates between 7-12V and has 14 digital input-output pins. You can also use 6 of them for PWM. That is to say, Arduino UNO has 14 pines.
4.2. ULTRASONIC SENSOR
What is the ping sensor? The ping sensor is a gadget you can utilize with the Fundamental Stamp to the degree how distant absent a protest is. With an extent of 3 centimeters to 3.3 meters, it’s a shoe-in for any number of mechanical autonomy and robotization ventures. It’s moreover surprisingly precise, effortlessly recognizing an object’s separate down to the half centimeter.
How does the ping? How does the sensor work? Figure 19 appears how the Ping sensor sends a brief chirp with its ultrasonic speaker and makes it conceivable for the Essential Stamp to a degree the time it takes the reverberate to return to its ultrasonic amplifier. The Fundamental Stamp begins by sending the Ping sensor a beat to begin the estimation. At that point, the Ping sensor holds up long sufficient for the Fundamental Stamp program to begin a PULSIN command. At the same time the Ping sensor chirps its 40 kHz tone, it sends a tall flag to the Fundamental Stamp. When the Ping sensor recognizes the resound with its ultrasonic receiver, it changes that tall flag back to moo. The Fundamental Stamp’s PULSIN command stores how long the tall flag from the Ping sensor endured in a variable. The time estimation is how long it took sound to travel to the protest and back. With this estimation, you can at that point utilize the speed of sound in discuss to make your program calculate the object’s separate in centimeters, inches, feet, etc…
Figure 20 appears a Schemes and cable layout graph you are able to utilize for testing the Ping sensor.
4.3 MINI (ASYMMETRIC) VIBRATION MOTOR
Vibration Motor; it is the kind of motor that provides vibration through eccentric hammers placed on each facetsof the engine. Vibration vehicles; Sieves are utilized in all regions that require vibratory movement such asloosening and dispersing
of materials which includes garage silos, flour turbines, feed mills, filter plants, vibratory drainage channels, grain and agriculture machines, sand lime coals. Below is the internal structure, components and vibration chart of the vibraston engine. (Figure 22) and (Figure 23) 39-46
The buzzer alternatives up numerous inputs (alerts) and emits sound in reaction to
it. diverse tools can be used to produce the sound; electromechanical, digital, mechanical. First, convert the dc voltage from the input pin to an oscillation signal using a buzzer resistor and transistor. The sign is amplified the usage of the induction coil. when high voltage is applied to the piezo ceramic disc, it causesmechanical growth and contraction inside the radial direction.
This reasons the internal steel plate to bend inside the contrary path. The steel plate
is continuously twisted in the contrary course and produces sound waves within the shrunken iceberg airspace. The buzzer takes it in an energetic manner and turns it into an
acoustical energy. some icebreakers have their very own circuitry and they take the power at once from the power deliver of the tool. then again a number ofthe blazers may be battery powered to preserve running on the possible mains interruption. and it works by means
of feeding from the monolithic voltage line rather than the mains. 47
The battery that homes the lithium and polymer chemical substances is called LiPO battery. Within the development of electric modeling, I think it is a sort of battery that has made a variety ofcontribution. nowadays, modeling is beginning to be used in electronic gadgets together
with navigation devices and mp3 gamers.
Lipo cells are made from cells. The nominal voltage of each mobile is 3,7
volts. series related cells are indicated by the letter S. In this case the quantity earlier than the letter S suggests the variety of cells. So while 2S is referred to as, it’s miles 3,7×2 =
1. 4 Volt. also for 3S, it’s miles three,7×3 = 11,1 Volt. in addition, 3S2P has been described for lipo tablet. The which means of 3S2P is three parallel linked 2
parallel connected. In this situation the voltage does not change but the milliampere cost doubles. The battery voltage of a battery cellular have to be 3V and the completely charged battery voltage need to be 4.2V. If the battery you operate falls underneath 3V of any cell, there may
be a danger of finishing the lifestylesof the battery. Overcharging, ie charging greater than 4.20V, additionally poses safety dangers. benefits:
Lipo batteries can generate a good deal more modern-day than NiCd and NiMH batteries (over discharge potential).Compared to other pills, while as compared, this is a bonus for modeling. Longer existence than NiCd and NiMH batteries.
They may be produced within the preferred shape and length.
Use and charging require unique attention. They require a special charger.
Your battery might also grow to someday, and a cellular may fail at some point when you stop it. (This happens not often) My suggestions for the usage of a lipo battery:
although frightening memories (rumors, fraudulent movies, and many others.) lipo pillars are safe as long assure criteria are taken into account. Already this battery become not allowed to be offered as a bomb.
I thinkthe videos taken for lipo battery bursts that can be visible at the net can be fraudulent. the subsequent video does no longer make the battery risky, even though the modelers of the Bodrum model attempt their qualityto strive.
4.6. Jumper Cables
Jumper cables offer extraordinary electrical execution along with tall toughness for tight steering and predominant natural fixing for long life unwavering quality. Accessible in ? inch and ½ inch breadths, jumper cables are utilized in regions that require amazingly little twisting sweep, such as between fundamental feeders and receiving wires or between fundamental feeders and RF hardware.
• High pull-off strength
• Excellent VSWR performance
• Low and stable intermodulation
Depending on scientific and technological developments, many problems can easily be eliminated today. Blindness, which is the common problem for many people in our world, is one of them. Object detection, separate estimation and early caution framework point at creating a straightforward arrangement to this issue with moo cost.This system is a low- cost, useful and effective system developed using basic engineering sciences. The object detection, distance measurement and early warning system detect the objects in the forward direction of the user, approximates the user’s body, measures distance and alerts audible and vibration. Furthermore, the system reports on which side the object detected according to the direction of the user is, by making a short and long sound. It is a great advantage that the system can be integrated. On the other hand, the number of ultrasonic sensors used in the system is limited due to the technical characteristics and capacities of the other components used. The system is scanning a certain angle horizontally. It does not vertically scan a height such as the height of the user. For this reason the system is limited and the detection capacity is low.
Consequently, considering the advantages and disadvantages; object detection, distance measurement and early warning system have been successful. The goal is achieved with low cost. The system is usable because it can be integrated. Science for humanity, effort for science, and faith for effort.
1 WHO, “Visual impairment and blindness – fact sheet no.282,” 2013.
2 Ses dalgalar?- Dr. Cahit Karaku?- www.yll44.com/bilimsel/ses.pdf
3 The physic of sound- https://homepages.wmich.edu/~hillenbr/206/ac.pdf 4,5,6,7 Technical explanation for ultrasonic sensor- CSM_Ultrasonic_TG_E_1_1
8 Smart Sensors and Applications Student Guide. VERSION 1.0. Parallax Inc., https://www.parallax.com/sites/default /files/downloads/28029-Smart-Sensors-Text- v1.0.pdf
9 PING))) Ultrasonic Distance Sensor. Parallax Inc., https://www.parallax.com/product/28015
10 PING))) Ultrasonic Distance Sensor (#28015). https://www.parallax.com/sites/default/files/downloads/28015- PING-Sensor-Product-
11 The Search for a Better Proximity Sensor Starts Here Published in Design World, February 2010. Balluff Inc. http://www.balluff.com/balluff/MUS/en/news/search-for- betterproximity-sensor.jsp
12 M. Kelemen et all, Puck collecting robot, 2014. In: Applied Mechanics and Materials. Vol. 611 (2014), p. 256-264.
13 RobotChallenge. International championship for self-made, autonomous, and mobile robots. Available online. cited 06- 112013. http://www.robotchallenge.org/
14 jwilans on SensorWiki.org, Ultrasound. Last modified: 2011/04/11, cited 2015/25/11.
Available online: http://www.sensorwiki.org/doku.php/sensors/ultrasound
15 N. Kelly, A Guide to Ultrasonic Sensor Set Up and Testing Instructions, Limitations, and Sample Applications. Application Note. Michigan State University. available online: http://www.egr.msu.edu/classes/ece480/capstone/fall09/group05/d ocs/ece480_dt5_application_note_nkelly.pdf
16 jwilans on SensorWiki.org, Ultrasound. Last modified: 2011/04/11, cited 2015/25/11.
Available online: http://www.sensorwiki.org/doku.php/sensors/ultrasound
17 J. Wilson, 2005. Sensor Technology Handbook. Oxford, UK.: Elsevier.
18 R. Pallàs-Areny, , and J. Webster. 2001. Sensors and Signal Conditioning, 2nd ed. Toronto, Ontario: John Wiley & Sons.
19 J. J. Carr. 1993. Sensors and Circuits. Upper Saddle River, NJ: PTR Prentice-Hall, Inc
20 Li-Hong Juang, Ming-Ni Wu, Zhi-Zhong Weng, Object identification using mobile devices, Measurement, Volume 51, May 2014, Pages 100-111, (2014)
21 M. Dekan, F. Ducho?, L. Jurišica, A. Vitko, A. Babinec, iRobot Create Used in Education, Journal of Mechanics Engineering and Automation. Vol. 3, Iss. 4, 2013, pages 197-202, (2013).
22 Z. Liu, F. Li, G. Zhang, An external parameter calibration method for multiple cameras based on laser rangefinder, Measurement, Volume 47, January 2014, Pages 954-962 (2014).
23 Y. Xue et al., A New Approach for Autonomous Robot Obstacle Avoidance Using PSD Infrared Sensor Combined with Digital Compass, Applied Mechanics and Materials, Volume 511-512, February, 2014, pages 101-104, (2014).
24 A. Carullo; M. Parvis (2001). An Ultrasonic Sensor for Distance Measurement in Automotive Applications. In: IEEE SENSORS JOURNAL, vol. 1 n. 2, pp. 143-147.
25 Z. Yi, H. Y. Khing ; Ch. Ch. Seng ; Z. X. Wei, Multi-ultrasonic sensor fusion for mobile robots, Intelligent Vehicles Symposium, 2000. IV 2000. Proceedings of the IEEE, pages 387-391.
26 D. Han, S. Kim, S. Park, Two-dimensional ultrasonic anemometer using the directivity angle of an ultrasonic sensor, Microelectronics Journal, Volume 39, Issue 10, October 2008,
27 M.Y.I. Idris et all, Parking Guidance System Utilizing Wireless Sensor Network and Ultrasonic Sensor, Information Technology Journal 8 (2), 2009, pages 138-146.
28 B. Henning , J. Rautenberg, Process monitoring using ultrasonic sensor systems, Ultrasonics, Volume 44, Supplement, 22 December 2006, Pages e1395-e1399.
29 D. Koniar, L. Hargaš, M. Hrianka, P. Špánik, Frequency and Trajectory Objects Evaluation in Frames Sequence, Advances in Electrical and Electronic Engineering, 2011.
30 G. V. Blessing ; D. G. Eitzen, Ultrasonic Sensor For Measuring Surface Roughness, Proc. SPIE 1009, Surface Measurement and Characterization, 281 (March 21, 1989).
31 P. G. Kim et all, Obstacle Avoidance of a Mobile Robot Using Vision System and Ultrasonic Sensor, Advanced Intelligent Computing Theories and Applications. With Aspects of Theoretical and Methodological Issues, Volume 4681 of the series Lecture Notes in Computer Science pp 545-553
32 A. Babinec, M. Dekan, F. Ducho?, A. Vitko, Modifications of VFH Navigation Methods for Mobile Robots, Procedia Engineering, Volume 48, 2012, Pages 10-14.
33 F. Fang, X. Ma, X. Dai, A Multi-sensor Fusion SLAM Approach for Mobile Robots. In: Proceedings of the IEEE International Conference on Mechatronics and Automation, Niagara Falls, Canada (2005).
34 J. Yun-ho, A Real Time Obstacle Avoidance for Mobile Robot Using Nearness Diagram, Limit-cycle and Vector Field Method. Korea Aerospace University (2006).
35 F. Ducho?, P. Hubinský, J. Hanzel, A. Babinec, M. Tölgyessy, Intelligent Vehicles as the Robotic Applications, Procedia Engineering, Volume 48, 2012, Pages 105-114.
36 D. Koniar, , L. Hargaš, S. Štofan, Segmentation of Motion Regions for Biomechanical Systems, Procedia Engineering, Volume 48, 2012, Pages 304-311.
37 Sukop M., Hajduk M., Varga J., Proposal Hardware and Software Modules for Multi- agent System of Robosoccer, Acta Mechanica Slovaca. Volume 18, Issue 2, Pages 20-27.
43 Delserro Engineering Solutions Blog (9 April 2013). “Sinusoidal and Random Vibration Testing Primer”.Delserro Engineering Solutions. Retrieved 3 February 2015.
44 Crawford, Art; Simplified Handbook of Vibration Analysis
45 Thompson, W.T., Theory of Vibrations, Nelson Thornes Ltd, 1996, ISBN 0-412- 78390-8
46 Hyperphysics Educational Website, Oscillation/Vibration Concepts